PNP Donut 3inch 140 140mm Carbon Fiber Frame 1407 4000kv Motor 25A BLHELI_S ESC Mini F3 / F4 Flight Control FPV Racing RC Drone
PNP Version Donut 140mm Frame
1. Wheelbase: 140mm;
2. Structure: H-type split;
3. Weight: About 75.4G;
4. Thickness: 2.0mm bottom plate, 2.0mm upper plate, 1.5mm side plate, 3.0mm arm;
5. Paddle: 3 inch paddle;
6. Flight control hole distance: 20*20mm, 30.5*30.5mm
7. Camera installation width: 19mm
8. Internal height: about 28mm
9. Motor: 13xx, 14xx series and other motor hole positions are 9*12mm size
10. Printed parts: tpu material, motor blade surrounded by *2, universal dog seat *1, antenna base *1
1407 4000KV Brushless Motor
Model: 1407
Item Name: 1407 4000KV 2-3S Brushless Motor
Version: CW Screw Thread / CCW Screw Thread ( Optional)
Configuration: 9N12P
Input Voltage: 2-3S Lipo
KV: 4000KV
Motor Width: 18.6mm
Motor Height: 29.7mm
Shaft Diameter: M5
Weight: 18g
Propelelr Adapter Shaft Thrad: M2
Recommend Propeller: 5 Inch Prop
Max. Thrust: 400g




Flytower F3 Integrated OSD Mini Flight Control
Receiver configuration, when SBUS and DSM receiver input, please configure RX3 as the input interface.
The DSM receiver takes power from 3.3V.
The SBUS and PPM receivers take power from 5V.
Factory firmware: betaflight 3.1.0 OMNIBUS
First, equipped with MPU6000 F3 flight control acceleration faster response; integrated 5V 1A BEC, integrated OSD. (This version is 6DOF, no barometer and electronic compass)
1. This board provides all the features, weighs only 7.7g, fixed hole for the 20MM ( M2.5 hole );
2. For four-axis models tailored, built-in LC filter, support BF firmware;
3. Using STM32F3CCT6 single-chip 256K flash memory, MPU6000 sensor SPI interface connection, faster computing speed;
4. Support 2-4S power input;
5. Built-in 5V 1A output BEC;

Flytower Mini F4 Integrated OSD Mini Flight Control
First, equipped with MPU6000 F4 flight control acceleration faster response; integrated 5V 1A BEC, integrated OSD. (This version is 6DOF, no barometer and electronic compass)
1. This board provides all the features, weighs only 8g, fixed hole for the 20MM ( M2.5 hole );
2. For four-axis models tailored, built-in LC filter, support BF firmware;
3. Support 2-4S power input;
4. Built-in 5V 1A output BEC;



