Electric Retractable Install Landing Gear
Introduce:
The retractable landing gear is designed for the multicopter Frame in order to provide a better perspective inaerial-filming / photography work. By using a 2-position switch channel of the R/C transmitter, you can control the landing gear to retract remotely. The retractable landing gear will not block the view of the camera lens, making smooth shooting in all directions possible.
Description:
Weight: 190g
Height : 200mm
Suitable For DJI Phantom Whole Series( Phantom 1 Phantom 2 Vision Vision+ FC40)
Tips:
If the switch channel on the TX has fail-safe function,set the fail-safe value to [Lower] position,so that the landing gear will be in [Lower]status when the receiver enters fail-safe,to land the aircraft safely.If the TX needs to restart after the flight controller use return to home function when aircraft out of control, please be sure to put the knob switch gear in [Lower] status first.
Disclaimer&Warning:
Please strictly follow the manual to assemble and use the retractable landing gear.As we have no control over use,setup,final assembly,modification or misuse,no liability shall be assumed nor accepted for any resulting damage or injury.By the act of use,setup or assembly,the user accepts all resulting liability.We accepts no liability for damage(s) or injuries incurred directly or indirectly from the use of this product.
- Previous Product:Landing Gear Protective Foam Protector
- Next Product:170mm Non-retractable Fixed Landing Gear
